SikaTack Activator 205 is the first of the four component SikaTack Panel Fixing System. The cleaner/activator is used to condition the surface, promote adhesion and generally degrease for all non-porous substrates and cladding panels.
Once the activator/cleaner has been applied, it must be left for at least 30 seconds to dry. Once dried, the substrate will be ready for the second component of the panel fixing system - the SikaTack Primer.
On a typical 50mm wide application, a user can expect up to 285 metres from a 1000ml tin. Sika recommend to change the cleaning paper every 2 metres. If the tin has been left open for longer than 1 hour or contents appears to be cloudy, then dispose of tin in a safe manner and open a fresh tin.
Be careful not to let this contact the panel's display side as this product will stain.
No posts found