The Primer 210 provides a black UV stable surface that promotes adhesion and is suitable for both porous and non-porous surfaces. Allow a flash off time of 30 minutes. Subsequent material (tape and adhesive) must be applied within 8 hours. After 8 hours, surfaces will require the preparation process again, wipe with Activator (if non-porous) and prime again with Sika Primer 210.
It is essential to use The Primer 210 to further promote the adhesion of the SikaTack Panel 50 Adhesive whilst also using the SikaTack Panel Primer too.
On a typical 50mm wide application, a user can expect up to 125 metres from a 1000ml tin. If tin is open for longer than 1 hour, dispose of in a safe manner and open a new tin. Shake the tin so that the movement of the steel balls in the container is clearly audible.
Be careful not to let this contact the panel's display side as this product will stain.